Re: src AS 0 and distributed cef

From: Benoit Claise (bclaise@cisco.com)
Date: Fri Jun 08 2001 - 06:21:24 PDT

  • Next message: Simon Leinen: "Re: RFC´s?"

    Hello Hielke,

    Hielke Christian Braun wrote:

    > Hello Benoit,
    > >
    > > If this is the exporting interface, there is no issue with netflow
    > > If this is on the interface where you enabled netflow, there is a small
    > > issue:
    > > As there is no yet an ifIndex for dot1q subinterface, your exported data
    > > will contain the ifIndex of the main interface. Note this feature should be
    > > released very soon; I tested an engineering image which works perfectly.
    > > Now I don't think that this relates to your problem.
    >
    > Hope so.
    > With that new release, would it be possible to get i/o counters via
    > snmp for the subinterfaces? That feature would be great ...

    Yes, correct or dot1q subinterface.
    Note that stats for ISL subinterface are already present

    >
    >
    > >
    > > To troubleshoot the problem, sh ip cef <ip_address>
    > > You should see the AS field populated.
    > > If not there, you have a look at your bgp table and correlate the
    > > information.
    > > If there, you should open a case with the TAC to troubleshoot further.
    >
    > The AS is shown for every ip i tried with sh ip cef. So seems to be
    > a bug. I will try to contact the TAC, but without a support contract it will
    > be major hassle.
    > Thank you very much for your help.

    In case of problem, contact me directly.

    Regards, Benoit

    >
    >
    > Best regards,
    > Christian Braun

    --
    cflowd mailing list
    cflowd@caida.org
    



    This archive was generated by hypermail 2b29 : Fri Jun 08 2001 - 06:35:55 PDT