RE: cflowdmux running without errors but no data coming in

From: Nunes, Steve (Steve.Nunes@coreexpress.net)
Date: Tue Jun 12 2001 - 15:22:33 PDT

  • Next message: Brett Rees: "flowwatch failing with error '[E] received packet from a source f or which we're not configured (0.0.0.0)'"

    Halldor,

    See the archive ...

    http://www.caida.org/archives/cflowd/0326.html

    concerning v8 support.

    Thanks,

    Steve Nunes
    CoreExpress Inc.
    Phone: (314)317-7520
    E-mail: steve.nunes@coreexpress.net

    -----Original Message-----
    From: Joe Loiacono [mailto:jloiacon@nastg.gsfc.nasa.gov]
    Sent: Monday, June 11, 2001 10:47 AM
    To: "Halldór Högnason"; frank hellemink
    Cc: cflowd@caida.org
    Subject: Re: cflowdmux running without errors but no data coming in

    Another thing you might want to look for is whether the IP address of the
    router that you've put in cflowd.conf is the same address that is showing
    up as the source address in the IP packets. If they differ, cflowd will not
    receive the data (I believe).

    Joe

    At 01:37 PM 06/11/2001 +0000, Halldór Högnason wrote:

    >Hi and thanks for your reply,
    >
    >Maby the CISCO is not sending the correct header to the cflowd, does
    >cflowd/mux support
    >Netflow v8 ?
    >
    >As you can see in my config I'm using the source-prefix v8 header and now
    >I'm just wondering
    >if it's supported my cflowd ?
    >
    >Best regards, 

    --
cflowd mailing list
cflowd@caida.org
--
cflowd mailing list
cflowd@caida.org

    This archive was generated by hypermail 2b29 : Tue Jun 12 2001 - 15:53:24 PDT