Re: Hi who know this?

From: K.C. Smith (ksmith2@netrail.net)
Date: Fri Jul 20 2001 - 19:49:31 PDT

  • Next message: Mark Fullmer: "Re: Cat6k-MSFC2 and netflow"

    Because the router is not responding or not responding properly to cflow
    SNMP queries. At any rate, it's not a cflowd problem.

    K.C.

    On Fri, 20 Jul 2001, Qingbo Jin wrote:

    > Hi all:
    > I have a question . I tried to install cflowd on another machine,
    > and use arts utilities to aggregate data. but why the new machine
    > do not have IP address after IF index(interface card)
    > Do anyone know why?? Or give me some hint about this
    >
    > Thank you .
    >
    > Jin
    >
    >
    > router: 205.189.32.250
    > ifIndex: 28 (ATM2/0.1-aal5 layer 205.189.32.94)
    > <-------------------------see here
    > period: 12/31/1969 19:00:00 - 06/14/2001 19:58:09 EDT
    > Protocol Pkts Pkts/sec Bytes Bits/sec
    > -------- ------------- ------------- ------------- -------------
    > tcp 28942258 0 25303324641 203
    > udp 866720 0 140264129 1
    >
    >
    > On the new machine
    >
    > router: 205.189.33.2
    > ifIndex: 3
    > <---------------------------see here
    > period: 07/18/2001 19:56:18 - 07/19/2001 19:58:43 EDT
    > Protocol Pkts Pkts/sec Bytes Bits/sec
    > -------- ------------- ------------- ------------- -------------
    > udp 15463865 178 17536685337 1621046
    > tcp 40714 0 1864493 172
    > icmp 17 0 1108 0
    >
    >
    >
    >
    >
    >
    > --
    > cflowd mailing list
    > cflowd@caida.org
    >

    --
    cflowd mailing list
    cflowd@caida.org
    



    This archive was generated by hypermail 2b29 : Fri Jul 20 2001 - 20:05:51 PDT